[ENG] Setup Tenda Router on iPad

Step 1: Check WiFi displays default name, TENDAXXXX

1. Ensure the iPad is connected to the Default Tenda
2. Ensure the IP address for Tenda is 192.168.0.1

Step 2: Setup the Tenda Router

1. After 2.5.1 – Step 1 (a), you will automatically enter the website tendawifi.com. (Screen for setting up Wifi Name and Wifi Password).
2. If this page fails to appear, please use the steps below:
   • Open Safari
   • Access tendawifi.com
   • Search IP Address 192.168.0.1
3. Log in to the website. The password is usually admin.
   • If login fails, try using one of the following passwords: admin6061e / adminfid / admin3215 / slurp3215
   • If still unsuccessful, use the password located under the router provided
4. Set the WiFi name as getslurp.com-OutletName.
5. Set the password as slurp3215 and click “Save”.
6. The router will reboot and please wait until the process is complete.

Step 3: Router Name Connection on iPad

Usually the WiFi will disconnect automatically, and you need to reconnect to the getslurp.com WiFi using the latest password.

Step 4: Setup Router IP Address (LAN IP Address)

1. Reopen Safari to access the router’s website (tendawifi.com) and the “Welcome to use Tenda router” page will automatically appear: Enter password slurp3215
2. Click on System Settings or Administration.
3. Change LAN IP Address to 192.168.2.1.
4. Click “OK” to save the LAN IP Address.
5. The router will reboot automatically.
6. If the Router IP Address changes, proceed to step 2.6 Router IP Address changes.